Our hot tub insulation kit is the cheapest in the UK and put together by real certified hot tub technicians. How it works is simple, when you install the multi-foil blanket, it will add a layer of 20mm thick reflective insulation that repels the cold air and reflects the warm air back inside the cavity. As a result, you'll need to use less energy to keep the water at your preferred temperature.
Included in the kit:
- X1 Aquaguard Holo Therm+ Multifoil Insulation blanket (1.2x10mx20mm thick).
- X1 Roll Heatlock Foil Barrier Tape.
- Instructions can be found below.
- Free nationwide delivery.
Give us a call: 07454272660
Email Us: hello@pinkblock.co.uk
Original Price: From £181.50Special Offer: From £131.50
Installation instructions
It's a relatively simple process.
1. Before you order a kit, ensure you have done the measurements for your tub. You'll need to make sure the height and circumference is suitable for the kit (not more than 1.2m high and 10m circumference).
2. Using the perimeter dimensions you recorded, and add 70mm. Unroll the insulation material and cut to the measurements. Stretching the insulation before cutting is advisable.
3. Take off all the spa side and corner panels. Start at a corner. Thread the insulation blanket behind the main panels or structure ensuring it hugs the top and bottom of the spa. Tape or staple it in place if you need.
4. Aiming to be as neat as possible, continue to thread it behind the main frame of the spa till you go all the way around the spa's cabinet and meet at the corner you started at. Aim to cover all elements such as the main control box, pumps and heater with the blanket. The only thing that should be exposed is the main frame of the spa.
5. Use the tape to connect the two sides of the blanket together and to the top and bottom of the tub structure. Ideally we need this to be as air tight as possible, so take your time and do it right the first time.
6. Replace your spa's panels carefully, both ensuring not to damage the insulation installation whilst ensuring the panels are replaced as tight and well-fitting as the manufacturer left them.
Perfect, now you have a perfectly insulated spa.
We have a full photo guide too - just follow the full instructions found here and get in touch if you need any assistance.
Give us a call: 07454272660
Email Us: hello@pinkblock.co.uk